Factors affecting the life of X-ray tube and maintenance methods

Temperature is an important factor affecting the life of X-ray tube. X-ray tubes generate a lot of heat during use.

2023-11-01

temperature factor

Temperature is an important factor affecting the life of X-ray tube. X-ray tubes generate a lot of heat during use. In order to make the product work stably, the anode should be added with heat dissipation device to ensure that the anode temperature does not exceed 55 ℃, and air cooling can be used if necessary. It is recommended that the customer use a temperature sensor to control the temperature.

Environmental factors

The ambient temperature is 5-30 ℃, and the relative humidity of the air is less than 80%.

Custody and storage

Product storage environment should be clean and dry, no corrosive gas. Be careful to protect the beryllium window from being touched. Acidic or humid environments can damage the beryllium window and cannot be repaired. X-ray tube for fragile glass must be gently handle.

Introduction of X-ray tube related terms

Carbon nanotube X-ray tube market prospects

Introduction of X-ray tube related terms

Carbon nanotube X-ray tube market prospects

X-ray tube principle

The X-ray tube is a vacuum diode operating at a high voltage.

2023/11/01

[Related professional knowledge] X-ray tube

The role of the X-ray tube: produce X-rays, which are used to penetrate the human body and observe human images after being received by a special receiving position.

2024/08/02

Introduction of X-ray tube related terms

X-ray tube is the core part of X-ray, is a vacuum tube, its internal contains anode, cathode, glass or ceramic shell, etc.

2023/11/01